|
I recently replaced the power supply caps in a 2009 Dynex I bought new back then.
the Dynex went out in Jan 2013 works fine now about $3.20 from Mouser for four caps. I used Panasonic low esr 105C spec .
I replaced the Dynex with a new 32" Toshiba in the b/room and re purposed the Dynex as a 2nd monitor on one of the P.C.s
The new Toshiba has a much better picture it was assembled in China according to the box works good anyway .
Bought a 50" RCA plasma on sale 2 days later for fam rm great picture .It has Samsung boards and panel in it hopefully decent stuff. I moved the 36"Sharp into another room .Both sets seem to have decent scalers
in them so I just leave the DVR /STB's set at 1080i
Hopefully these two new sets will be more reliable than the Dynex .
Last edited by tubetwister; 04-20-2013 at 05:45 PM.
|