Thanks for the tip Sean. I made 2 preliminary readings but I also need to ask if I'm checking it correctly. I followed 2 of the wires that the schematic says are on a particular coil and did the same with another. Both lead to the power rectifier plug. That is where I took the readings. I don't know if that is the correct way to get that or not. On the schematic, one is supposed to be 200 Ohms and reads 380. The other is supposed to be .2 Ohms and reads .6 . I haven't dug around for the other 2 before I find out if I am doing this right.
If this is correct, then the transformer is shot I guess.
Any input? Thanks!
__________________
--> Tell the truth and run. - Yugoslavian proverb
|