|
well the vert cent pot was open on one side, so that should help with the centering and maybe the excessive screen voltage on the HOT.
I did notice that some work had been done there before. one of the ends of the pot (the one with two wires and a resistor on it) still had the remnants of a pot leg soldered on, like they did not bother to undo the the pot before, just cut off the leg that was there and solder it on to the new pot.
My guess is these vert centering pots were a common failure point.
Last edited by DaveWM; 11-13-2012 at 09:37 PM.
|