|
I believe the motor that powered that changer mech is a standard industrial fan motor from either Westinghouse or GE.
It should have oiling ports on the front and back of the motor for the bearings that you need to use some 20wt non-detergent oil in them, such as 3-in-1 in the blue can (DO NOT use 3-in-1 in the red can because it has detergents in it and that can ruin your motor bearings) or Zoom! Spout, and you have to oil the bearings on that motor at least once a year for best performance.
I hope this helps.
|