I've moved onto the main section of the chassis. I thought I'd start at the top left and work my way across to the lower right.
On the right side of the two terminal strips were 3 27K 2W resistors twisted in parallel. I have 3 27K 3W resistors ready to go back in. But thought I'd replaced the 3 with 1 9K 10W wire wound resistor. What do you think? Some before and after pics.
Then on to another section. The lower capacitor is connected to the left hand terminal of the capacitor above it. When I installed its replacement, I jumpered the lower 2 terminals and installed the lower capacitor on its own terminal.
