Quote:
Originally Posted by Electronic M
If by millennials your referring to me....Don't, I'm not like 99.9% of those around my age.
Also don't assume I'm not knowledgeable on tube radios. I've owned well over 200, worked on ~80% with a 95% success rate, and have over 130 presently...Not to mention all the tube TV work I've done.
I say vague on your pulling the first/last two in the string vs using the function names since you could be referring to the signal chain (which is a standard topology), or the heater string which does not need to be wired with the tubes in any fixed order.
|
EDIT :
without an electronics or EE education (~ 3yrs EE study at a universality like CAL State Electronics and Solid State Engineering study (like me) or bench tech experience (like me >part time + short timer ) and concomitant qualifications all that sounds like unqualified and hobby opinions to me and you are wrong about the heater wires ( I was informed below ) on these radios anyway stick to your day job mate
I