Thread: Zenith roundie
View Single Post
  #15  
Old 12-07-2010, 05:33 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
1.5 meg reads 1.7 so that is a bit out (5% resistor) but that does not seem far enough out.

I am going to see if I can get a direct read of the grid and cath voltage, I am thinking maybe the cathode is low, it goes to the 350v so I will start there.

It would seem that if the over all B+ is low the boost would be low also, but maybe the relationship between the two could be upset? The boost is the source (thru a resistance series and the HV pot) for the shunt grid bias.
Reply With Quote
Audiokarma