Alan in most late 50's and upwards philips sets you only need to replace the boost filter and you are ready to go, they use the yellow mustard capacitors wich do not fail with age and moisture.
electrolitics are also reliable
just pull off the cap of the horizontal output tube and power it up with a lightbulb in series...watch if the filter capacitors dont get hot and watch the power consumption with an ampmeter. if all looks ok give it full power
--------------------
the predicta has already showed me a raster after some temporary repairs
rast.jpg
so i turned my attention to the cabinet
it does not look the same does it?
I repainted the grille, polished the trim, repainted the gold around the dial, retouched and polished the wood cabinet.
after the cabinet i will do the electronic restoration
WP_20190301_01_02_11_Pro.jpg
i need a channel clunker knob ...anybody knows were can i find one?