|
Thank you for the excellent clarification! After I read your explanation, it made perfect sense. Still learning - thanks for the patience:-).
With the diodes installed I'm now getting 5.4kV HV which should be plenty, but I'm a bit concerned that the B+ is now 280V (pin 8). Rider's list the B+ at 255. My line voltage on my variac is set to 117V.
The image is getting more stable, but I can't seem to eliminate the "dual" image (side by side picture). Now that I have a workable HV, I can narrow that down I'm sure.
Thanks so much!!!
Scott
|