View Single Post
  #46  
Old 02-20-2017, 10:11 AM
dtvmcdonald's Avatar
dtvmcdonald dtvmcdonald is offline
VideoKarma Member
 
Join Date: Nov 2012
Posts: 1,191
Its not just a lack of green. Its also a lack of magenta/violet.

This simply means that the I/Q or rather R-Y/Q balance is off seriously.

Look at the SPECIFIED type color bars with your scope and adjust per instructions. Alternatively, use R-G-B-Yellow-Cyan-Magenta bars and
adjust so bars containing a given primary all have the same height at
the CRT grids ... see CT-100 scope traces. Pay particular attention
to the R-Y gain, its non-intuitive.

If this fails, you have matrix resistor issues.
Reply With Quote