Yup they suckt so did Admiral especially UG'ing from a 23EGP22.
HINT
Put a box under the CRT. When its loose the cabinet will drop down
& you can easily pick up the jug. In reverse use a light & mirror
to be sure the CRT is centered then torque it down. Some Jap
sets come out the front & are bolted from the front. Do the same
but lift the cabinet away. Have a 10 MM deep on hand for them.
Newer sets with "ears" to mount usually come out as an assy.
Shield, DGS coil, yoke etc. Pull & put on table, also the new CRT
& move things over standing up. The lazy way is the best here.
73 Zeno
LFOD !