Quote:
Originally Posted by vortalexfan
Ok, here's the Oscillator and antenna coils.
|
Looking at the schematic I'm in disbelief that you opened a winding in both by simply taking voltage measurements.
Are you 100 percent positive that both transformers have at least one winding open? Maybe you should post us a couple pictures of the entire bottom side the chassis, just in case you're overlooking something obvious.
These Meissner numbers will replace them. They use to be common as dirt.
14-1010 standard broadcast band antenna coil
14-4034 456kc oscillator coil
I'm sure there's other manufactures numbers that would work, as well as pulling them out of junked radios. The oscillator coil should ideally be for 456kc, but as mentioned you can usually walk the IF's off frequency a small amount.