Quote:
Originally Posted by John Folsom
...One other thing you can try.. remove the solder from the terminal which connects to the plate cap of the HO and remove the flyback wire which goes to the HV winding and leaving the flyback wire going to the primary attached to the terminal. Run the ring test again, and you should see a normal response, proving the shorted turn.
|
Um.. not sure i follow correctly. But you're saying leave the HV winding ('tire') electrically floating but still physically in place(?).
Would not a shorted turn in the 'tire' still load the primary whether or not it's electrically connected? Seems like you'd have to physically remove the tire to do the test.
Or maybe i'm misreading whut U sed.
