Quote:
Originally Posted by Findm-Keepm
Ion trap? I've got a GE technical whitepaper describing an Ion Trap Coil - I presume they were later replaced by movable magnets?
The resistance of the coil described is 230 ohms - what does your coil ohm-out at?
Cheers,
|
But BOTH ends of the coil seem to be connected together and to the ground terminal, so it could not have been wired to pass current from an external source. I would have to unsolder the leads to ohm it out. Picture 3, above.
I suspect that the 3NP4 crt (which ran at 25kV) had an aluminized screen and did not require an ion trap.
Still puzzled
jr