Hi to all,
Hi VU3KFK, Welcome ! to the TV Repair section
Your Google Drive photos show you have some sort of full screen vertical & horizontal scan (a raster) so something is working.
Are you applying a video signal to the TV, if so, how?
Via a VHF modulator with Channel 3 or 4 output connected to the TV's antenna ?
or
Via a direct composite video baseband signal to the TV's monitor input (if it has one) ?
Your photos do not show the full board so it's impossible to see if the TV has an A/V monitor input.
With no signal present, the H & V oscillators run unlocked so it's pretty normal to have the scan doing strange things.
The LM386 is an audio amp & vertical scan is basically a 60Hz amplifier so it's not unusual to see one there.
The chassis would benefit from a cleanup (Kleenex & Q-Tips).
Look for any bulging electrolytic capacitors.
Please add photos with video content displayed.
You can post photos directly here bypassing Google Drive.
Best Regards
jhalphen
Paris/France
Last edited by jhalphen; 03-27-2022 at 08:01 AM.
|