Quote:
Originally Posted by zeno
That is often seen with cross hatch. Try backing off the brite, contrast
& sharpness. There are also 1 or 2 more video controls. One on
the 9-88 & another low on the chassis in SOME models.
On the 150-190 IF marked C-2 adust. Try bumping them but remember where they were.
Zeno  |
I tried adjusting brightness, contrast, peak pix (sharpness), and G2’s. The fact that sharpness can be adjusted from smearing at full counterclockwise to ringing at full clockwise and the streaking doesn’t go away, combined with the fact that according to the circuit, video peaking is in the luma module’s IC, seems to imply that the streaking is occurring in the video signal path before the luma module’s IC. The C2 adjust is a pot that controls the detector level, right?