|
With grill cloth you basically want to divide and conquer.
Start in the center of one edge and tack, then pull taunt and tack the opposite edge. Then go out to one corner and pull a little tension at 45degrees from center, tack. Crossover to the opposite corner, tack, then repeat for the two remaining corners. Now focus on finishing the first two parallel edges, subdividing down while alternate tacking side to side.
Next tack the center of one of two remaining edges, pulling slightly outward, in an attempt to match the stretch at the corners. Repeat the dividing process as with the first two parallel sides, only now you focus on matching the stretch initialized at the corners. I generally do longest sides first, because that’s where the most stretching needs to occur. Don’t go crazy with the stretching, that only makes it more difficult to keep things even, plus the cloth will tend to pull from under the staples later on. Watch the pattern in the cloth as you stretch it, working out from the centers.
Hope that makes some sense.
Last edited by Kevin Kuehn; 09-05-2011 at 02:53 AM.
|