View Single Post
Old 01-10-2017, 07:41 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 10,273
If you can, try chipping away a tiny bit of glass to expose just enough metal to solder to. Use really fine wire to extend it. Once you have the top glued/soldered on you may want to bend the connector open a pinch so it grabs, but gently enough that you won't have to worry about it pulling the top cap off.
Tom C.

What I want. -->

Reading between the scan lines since the mid 2000's.
Reply With Quote