|
Probably yellow. Orange tends to be a lot closer to red on most resistors. Find it on the schematic and double check the value.
Resistance needs to be within tolerance. The silver band indicates that that part should be no more than 10% away from it's labeled value. Wattage is fine to increase on resistors. Resistors tend to increase in resistance when they fail or age really badly...What it will do the circuit if it is substantially over rated value varies (usually it will not cause damage to other parts) depending on where and how it is used...It could be unnoticeable, or it could change a deflection time constant and make a hold control never lock...Worst case is probably if you increased a value in such a way that you lost the drive to the H output tube.
|