Quote:
Originally Posted by Phil Nelson
And thanks again to Chris for this bit of advice.
|
Phil, after all of the great advice and tips I have learned from many of your restoration pages, I am glad to be able to offer even a little tidbit back in return.
Quote:
Originally Posted by Penthode
Phil, Are you connecting the Sencore from terminal J to ground?
|
Terry, I also connected my VA62's video between point J on the RCA CTC-4 schematic and ground, and in my case, I got near-perfect video right from the start. The signal was, if I remember right, inverted video at about 3 volts peak-to-peak. Feeding it at point J seems to also put the needed signal to point L, through the nearby components. I also tried between point L and ground and did not get a usable signal; I did not try between points J and L (but did not need to, as noted above).