Find the vert output IC & resolder it even if it looks OK.
You can do a search on the IC ##'s to find out which one it
is or post a clear chassis pix. It will be mounted on a small heat sink.
Only other one is prob the audio out & the SPKR wires usually go
near it. Also there is 2 of most parts if stereo.
As far as soldering the pad goes if it wasnt soldered dont bother.
If it was you need a hot iron.
Once you find the output IC you can find all the vert components.
Example: if the IC is designated say IC401 all other vert parts
will have a 400 number. Other stages will use different series.
Works on almost any modern TV.
Keep us posted......
73 Zeno
|