|
I acquired one and went through it about a year ago. Unless it has been recently overhauled, you'll find that a lot of the 1% resistors are no longer 1% so it will need a complete going through and calibration. There were several different versions of this unit so make sure the manual and schematic matches your serial number.
It is set up by using data from a tube manual so no "setup charts" are needed but they did publish one with some common tubes in it. Having only one meter for all functions is a little strange but it does the job and is a great unit to really analyze tubes. Enjoy it.
__________________
Tim
|
03-31-2016, 08:59 PM
Threaded Mode