|
|
|
|
|
#1
05-31-2018, 10:11 AM
|
||||
|
||||
|
This B&K 415 is a TV alignment sweep/marker generator...Are oscilloscope probes even valid to use with it for any purpose?
The BNC switch would be relatively easy as I have several loose female  BNC jacks in my parts bin...
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
|
#2
05-31-2018, 02:30 PM
|
||||
|
||||
|
If you don't already have them you can download the schematic and operators manual here.
https://elektrotanya.com/bk-precisio.../download.html The manual shows all the cables the unit came with. No reason you can't make your own using some RG58 coax. Agree with changing mic connectors to BNC, and I believe the hole size is the same 3/8"? You don't even need a demodulator probe if you pick off the signal after the TV's detector diode. Can't think of any reason you'd use a scope probe unless you want the attenuation. I like using a BNC to mini grabbers cable to connect in circuit. BNC to BNC for hooking to scope. Last edited by Kevin Kuehn; 05-31-2018 at 02:36 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
