Curtis Mathes C20 Ctc 15/16 clone woes

[ZenithNut]

Hello all,

I recently got a CM C20 ctc15/16 clone (it looks to have characteristics of both sets). So far I have a baseline of a good testing 21fbp22 Hi lite picture tube, an open circuit breaker, an open on/off switch, and a flyback with a shorted primary. Both leads of the primary are lifted out of circuit. It should measure 1 ohm where it measures .1 ohm as if you just short the meter leads together so unless im doing it wrong I say its shorted.

The flyback circuit is most similar to a ctc 15.

Can I rewind the primary? The secondary ohms out fine and is not burnt up or anything.