Toshiba 27AF46c vertical lines not straight

[zeno]

ALWAYS write down the original settings so you can go back to first base.
Also be sure you exit the service menu by the book or the settings may not
stay.
Anyhows I see ( I think ) a very slight pin problem & maybe width.
The biggest thing is the bottom half of the pix looks brighter like there
is some vertical fold over. If its there its usually bad caps in the vert.
Post a few more screen shots & a chassis pix. At this time Toshiba went
from there own chassis to one built by Orion / Emerson. That may help.

73 Zeno
LFOD !

Originally Posted by JohnCT

In any case, if the adjustment shows a decimal or binary number, write it down before adjusting it. Avoid things like horiz freq or HV adjustments.

John