#1
|
||||
|
||||
21AXP22 gasket replacement?
Well, subject says it all. The one on mine is distorted and I’m wondering if any 4 or 5 owners have found a suitable replacement. This is the one up front by the glass, not the one back by the flange.
Thanks! |
#2
|
||||
|
||||
There's a slim chance I might have a spare. I bought an ex CTC-4 AXP that I know had the black flange gasket but I don't remember if it had the gray front gasket or not.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#3
|
||||
|
||||
Cool. I’m wondering if was a generic extrusion. Then we can all have a spare
|
#4
|
||||
|
||||
Quote:
IIRC the inside of the mask is ribbed and the ribs compress the gasket at regular intervals. If the only issue with the one in your set is those regular dimples from the mask I'd just keep using the one you have.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#5
|
||||
|
||||
I didn't even remember the front gasket - I guess it usually stays in place when removing the tube? Anyway, sorry to say I don't have a spare. - Good luck.
|
Audiokarma |
|
|