Late 1920s Eveready Model 1 TRF Set need info

[vortalexfan]

Originally Posted by Kevin Kuehn

Just a heads up. The owner of PTOP passed away a while back and apparently someone bought the entire inventory, but he's not saying who he is at this point or when he'll be able to reopen the business. I'd be very surprised if you hear anything back via the old email.

https://antiqueradios.com/forums/vie...things+of+past

https://antiqueradios.com/forums/vie...things+of+past

OK, so I found some regular resistors in my stash that I think might work in my radio as a replacement for the bad fuse style resistor.

I found a box of 47k Ohm 1W 2% tolerance Flameproof resistors that are branded RCA, a package with a 56K Ohm 1W 2% Flameproof Resistor that is Branded Sylvania and I have a package of 56k Ohm 1/2W Carbon Film Resistors that I had left over from when I was restoring my Meck TV last year that either one of those I think should work in this unit.

I think I could just solder it under the chassis between the two points where the resistor holder above ties into the circuit and then just leave the old fuse style resistor in the holder above the chassis for appearances sake (I cleaned up the glass housing of the old resistor and I looked inside and it looked like there wasn't anything in there anymore which might explain why it measured open).

Does any of these resistors I mentioned stick out as far as one that might work better than the other in this position?

Also I found a couple of capacitors in my capacitor stash that might work in place of the old filter caps in the filter supply circuit, one is a 4.7 MFD 250 WVDC Electrolytic and the other is a 2.2 MFD 100 WVDC Electrolytic.

Would those work fine in the filter cap positions on this radio seeing as they didn't specify a Working Voltage for the original filter caps?

Also the 5,000 Ohm "B" Resistor in this radio's Power Supply/Audio Circuit measures open as well, and I was wondering what kind of wattage of resistor it is, its rather large and looks like it might be a 5 or 10 Watt WW Power Resistor but I'm not sure as it doesn't have any information written on it.

Thanks for your help.