#1
|
||||
|
||||
Avante Horizontal Position Chassis 25EC58
I think I asked this before, but I can't seem to find the answer.
Is there a way of adjusting the horizontal centering? Mine seems to be off by almost an inch to the right. Nothing that is displayed comes up centered, but always to the right. I have the service manual, but can't find anything for adjusting it. Find it hard to believe it is set in the design and can't be adjusted, but what do I know. Thanks
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
#2
|
||||
|
||||
I dont remember one. If it does it may be a jumper.
Be sure the main B+ is right + or - 2%. Be sure all 5 safety caps are new & the right type. Check the base resistor & cap for the hoz output. 73 Zeno LFOD ! |
#3
|
||||
|
||||
Quote:
Under most viewing I don't notice it, but there are many times it triggers my OCD. LOL
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
#4
|
||||
|
||||
Does adjusting the horizontal hold help any?
__________________
Bryan |
#5
|
||||
|
||||
Nothing really noticeable with regard to position. Find it odd there isn't an adjustment somewhere. Always thought height, width and position were all necessary adjustments.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
Audiokarma |
|
|