|
#1
|
||||
|
||||
I managed to get in touch with the original owner of the cabinet and he was able to tell me what was currently installed. Taito's Buggy Challenge. This seems to add up as it has the same control layout and the PCB set is identical. It is also not a JAMMA device so some research will ne needed before I can figure out how to hang an RGB monitor off it for testing purposes.
|
#2
|
||||
|
||||
Using the wiring diagram I was able to add a second video harness with RCA ends for RGB+S. Grabbed one of my nastier PVM's as it was small and dragged it to the workspace.
Aside from the green tint which is the fault of the PVM I only had one time where on a manual degauss the video corrupted up and the machine had to be power cycled. The sound is good, the controls all work and the game is more than playable. Now that I've verified that this part of the system is good I will proceed with rebuilding the analog board. |
|
|