#1
|
||||
|
||||
Lectrotech V-7 Vectorscope- need instructions
Just got a working one off fleabay, but I don't know how to connect it...
__________________
Evolution... |
#2
|
|||
|
|||
hey i ask the same question around 6 months , i found a schematic only so far but no manual so if you find one i would like a copy to. mine was new in the box with one dead shorted cap. the cap just under the crt. plug, i forget the value off hand i would have open it back up .
|
#3
|
||||
|
||||
Quote:
http://www.myvintagetv.com/manuals_and_documents.htm Chuck
__________________
www.myvintagetv.com Learn from the mistakes of others - You can't live long enough to make them all yourself. Last edited by ChuckA; 01-31-2014 at 11:46 PM. |
#4
|
|||
|
|||
Quote:
|
#5
|
||||
|
||||
Thanks for the manual!
Man, mine has been messed with like a million times. Lots of different value resistors in it, and it's not running on frequency either just like my RCA one. It's strange though, I can get a proper color bar pattern out of this one but the crosshatch and dots function is all screwy. Is there something specific to those functions that would cause them not to work while the color bars are fine?
__________________
Evolution... |
Audiokarma |
#6
|
|||
|
|||
Quote:
|
#7
|
||||
|
||||
Figured it out: my monitor was loading it down too much, causing the problems (I was using the composite output). There was also a slightly noisy color pot I had to clean, but it works great now. I'll post some pics later.
__________________
Evolution... |
|
|