|
#1
|
||||
|
||||
Here is a video of what is happening https://youtu.be/V7HpOP1hUtk
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
#2
|
||||
|
||||
Was able to somewhat get a signal https://www.youtube.com/watch?v=hja20nVWWiw
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
#3
|
|||
|
|||
Did you try switching to channel three?
|
#4
|
||||
|
||||
Turned to all channels
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
#5
|
||||
|
||||
Did you restuff all cans and then turn it on, or did you restuff one can at a time and turn the set on? It's better to do one can at a time so if a problem happens you know which one it is, and easier to find the mistake...
I would try running a coax directly from a cable box or DTV converter out, on to channel 3 and see what you get...
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet.. |
Audiokarma |
#6
|
||||
|
||||
Quote:
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
#7
|
|||
|
|||
Quote:
quit using the generator give it a real signal from a DVD or converter box. |
#8
|
||||
|
||||
without the doubler as in I did not connect the negative end of the cap to anything.
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
#9
|
||||
|
||||
And no luck with a signal from my bt modulator with the input plugged directly into the RF out. Sound is fine just a very bad video signal.
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
#10
|
||||
|
||||
I would assume that would be why there is problems, each cap in those cans you restuffed needs to have the negative leads connected to ground, as in metal of chassis, unless those cans are isolated... What I would do is connect all neg leads from each cap in each can together soldered, and run a wire soldered to them to a spot on the chassis that already has a cut out where ground leads are already solder too...
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet.. |
Audiokarma |
#11
|
||||
|
||||
It looks alot better.. Got a full raster now.. I would still work on the Horz issue before going onto color etc...
You can post pics from an external pic hosting site and post them on this forum.. The forum does have an "Insert Image" function in the advanced posting, and then copy/paste image link into it, and it will post html code to your image..
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet.. |
#12
|
||||
|
||||
Photobucket gives you the IMG code to paste into your posts so the picture will appear in them...It's even easier that way.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#13
|
||||
|
||||
Ok will do that next time. Now my question is what is causing the poor horizontal lock and how can I fix it? I have recapped the horizontal board and have put a new tube in and replaced an open IF cap and still I have very poor hold and the picture is bending near the top. ie. the vertical bars on the crosshatch pattern are distorted and bent near the top of the screen. How can I fix this? This has been frustrating me very much and I would like to fix this irritating horizontal hold once and for all! Any input is greatly appreciated!!
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
#14
|
|||
|
|||
how does it look on reg programming.
|
#15
|
|||
|
|||
try not directly connecting the ant lead, so the signal is weaker, see if you get a snowy pic that lacks the bending and other distortion.
|
Audiokarma |
|
|