#13
|
||||
|
||||
convergence is a methodical process
before you even touch any of the static or dynamic convergence adjustments, always make sure all of the basic alignments are done first. such as linearity, height, width and then set your purity and if everything looks good then you can move on to the convergence adjustments. Previous posters in this thread also eluded to making sure the blue lateral and convergence yoke are in their proper physical positions otherwise you can end up chasing you tail on what otherwise would be a normal alignment proceedure. By the way my avatar is a Boswell ctc 9 as well.
__________________
[IMG] |
|
|