|
Icom IC-211 repair
I have on the bench an Icom IC-211 2 meter transceiver. I bought it as a project. Upon power up there was no sound and the display would not change. I found the speaker leads broken off the speaker and after doing a lot of soldering and finding a pair of resistors on the display driver board installed incorrectly it will now tune up, but not down. I did check transmit and the power output is low. Right now I would like to be able to tune down in frequency. Anyone have any experience with this problem? I am missing the PLL and VCO covers and the top control cover as well. It seems to receive and like I said it will transmit, but the power output is low. Any help would be greatly appreciated. The chopper alignment looks good.
Thanks
Bill
|
08-16-2015, 10:18 PM
Threaded Mode