Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-02-2017, 11:37 PM
MadMan's Avatar
MadMan MadMan is offline
The Resident Brony
 
Join Date: Oct 2016
Location: Chicago
Posts: 1,217
What's this thing do?



Simpson Capacity Bridge 381. Guess where I got it.

Can I... measure the capacitance of capacitors with it? O_o I mean, that's kind of what it looks like. Can't really find any info on these.

Last edited by MadMan; 02-02-2017 at 11:58 PM.
Reply With Quote
  #2  
Old 02-03-2017, 09:36 AM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
Yes. Here's an article:
http://www.rfcafe.com/references/qst...l-1944-qst.htm

I never used one, but I believe this one needs an external signal generator, indicated by "1000~" in the article.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #3  
Old 02-03-2017, 10:06 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,832
'tis from 1950 - here's some "new product" listings..
__________________
Brian
USN RET (Avionics / Cal)
CET- Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!

Last edited by Findm-Keepm; 09-29-2017 at 06:39 PM.
Reply With Quote
  #4  
Old 02-03-2017, 11:01 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 14,758
Works a lot like my Heathkit C3...Only swap a meter for the eye, remove resistance and leakage testing.

Might be able to mod that to be a RLC bridge with some engineering work...
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
  #5  
Old 02-03-2017, 09:07 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
oops - didn't realize the power cord was attached, so now guessing this has an internal oscillator, so nothing more is needed.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
Audiokarma
  #6  
Old 02-04-2017, 12:19 AM
MadMan's Avatar
MadMan MadMan is offline
The Resident Brony
 
Join Date: Oct 2016
Location: Chicago
Posts: 1,217
Thanks for the help guys!

Quote:
Originally Posted by old_tv_nut View Post
Yes. Here's an article:
http://www.rfcafe.com/references/qst...l-1944-qst.htm

I never used one, but I believe this one needs an external signal generator, indicated by "1000~" in the article.
Very helpful! Thanks

Quote:
Originally Posted by old_tv_nut View Post
oops - didn't realize the power cord was attached, so now guessing this has an internal oscillator, so nothing more is needed.
You know... there's nothing in it, really. Which is a little weird. It would need a tube for an oscillator, right? Must use line 60Hz.

>Pic<

Quote:
Originally Posted by Findm-Keepm View Post
'tis from 1950 - here's some "new product" listings..
Cool. I love all this old Simpson stuff.

Quote:
Originally Posted by Electronic M View Post
Works a lot like my Heathkit C3...Only swap a meter for the eye, remove resistance and leakage testing.

Might be able to mod that to be a RLC bridge with some engineering work...
So you mean I don't have to buy a big expensive thingy? Sweet.
Reply With Quote
  #7  
Old 02-04-2017, 09:39 AM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
It's hard to believe it could operate at 60 Hz for small capacitors, especially the mmf scale.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #8  
Old 02-04-2017, 09:44 AM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
By the way, do you notice the meter movement is mounted upside down? That's because the instruction to tune for "maximum" is really tuning for a minimum.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #9  
Old 02-04-2017, 01:10 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,510
Quote:
Originally Posted by old_tv_nut View Post
It's hard to believe it could operate at 60 Hz for small capacitors, especially the mmf scale.
The Heathkit C-3 just uses 60 Hz from a 55 Volt winding on the transformer... reads down to 10 mmf.

jr
Reply With Quote
  #10  
Old 02-04-2017, 04:04 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
Quote:
Originally Posted by jr_tech View Post
The Heathkit C-3 just uses 60 Hz from a 55 Volt winding on the transformer... reads down to 10 mmf.

jr
Interesting - I believe you, but still hard to -

Reactance of 10mmf (10pf) at 60 Hz = 265 Megohm
Maximum current at 55 volts is 0.2 microamps

Reactance goes down to 16 Megohm at 1 Khz, still a pretty big number
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
Audiokarma
  #11  
Old 02-04-2017, 08:55 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,510
Just for grins, I just measured the smallest cap that I could find in my (junk) assortment that had leads... (7.7 uuf according to my DE-5000)... the old Heathkit C-3 produced a sharp null on the eye tube at slightly below 10 uuf, so I believe that this bridge circuit is indeed capable of measuring small values of C using a 60 Hz source.

jr
Reply With Quote
  #12  
Old 02-28-2017, 12:28 PM
Notimetolooz's Avatar
Notimetolooz Notimetolooz is offline
VideoKarma Member
 
Join Date: Mar 2014
Location: Dallas, TX
Posts: 547
Quote:
Originally Posted by jr_tech View Post
Just for grins, I just measured the smallest cap that I could find in my (junk) assortment that had leads... (7.7 uuf according to my DE-5000)... the old Heathkit C-3 produced a sharp null on the eye tube at slightly below 10 uuf, so I believe that this bridge circuit is indeed capable of measuring small values of C using a 60 Hz source.

jr
Interesting. I never could get the lowest range on my C-3 to work. Thought it was because of the reason Old_TV_Nut mentioned. I tried another eye-tube.
Reply With Quote
  #13  
Old 02-28-2017, 01:10 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 14,758
My low range works somewhere below 100pF (lowest cap I recall trying), but I did recap my unit with precise value caps.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
  #14  
Old 03-01-2017, 02:03 AM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
Quote:
Originally Posted by Notimetolooz View Post
Interesting. I never could get the lowest range on my C-3 to work. Thought it was because of the reason Old_TV_Nut mentioned. I tried another eye-tube.
Perhaps the range selector (wafer) switch was just dirty. Most are after 60 years. if not that then that range's reference cap was likely bad. My experience with any of that type (many similar) cap checker is that almost all of the original caps have to be changed out. Especially if you are actually going to use it for value measurements, which many people don't even care about due to the ease and precision of a DVM.

But these old units IMO are invaluable for the leakage function at rated voltage. Simply nobody today makes anything that does this EXCEPT Sencore to my knowledge. Ebay has a couple of those modern units right now. An LC102 for a grand or two and even the old Z Meter LC75s from a suspect the 70s are usually a few hundred.

So the old Heathkits are to me definitely the way to go hands down. Simple in construction, yet durable enough, and they get the job done well with the added attraction of vintage looks and a magic eye. Some don't like the magic eye and want a milliammeter. Indeed more accurate, so you step up to a Sprague TelOhmike, but they are much more complex. There is a Pyramid model that is like a C3 only with a milliammeter. That's what I want! Oh and never change out you magic eye tube unless it gets dim or shorts.
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Reply With Quote
  #15  
Old 03-02-2017, 01:05 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,510
Quote:
Originally Posted by Notimetolooz View Post
Interesting. I never could get the lowest range on my C-3 to work. Thought it was because of the reason Old_TV_Nut mentioned. I tried another eye-tube.
I would check the 200 pico farad (pf or uuf) cap on the range switch and make sure that it is correct... you might have a 200 nano fafad (nf) by mistake in that position.

jr
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:21 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.