Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-23-2019, 07:16 PM
keith6996 keith6996 is offline
VideoKarma Member
 
Join Date: Jan 2019
Posts: 5
Philco 48-2500 projection tv

Greetings !

I'm looking for a width control for a Philco 48-2500. It's (according to SAM'S spec's) is 20 ohms. It also has a center tap and a ferrite adjustable slug.
It looks like the old one fried out probably 40 years ago.

Thanks

Keith
keithwichmann@att.net
Reply With Quote
  #2  
Old 02-23-2019, 07:19 PM
Tim's Avatar
Tim Tim is offline
VideoKarma Member
 
Join Date: Mar 2004
Location: New Jersey
Posts: 635
What is the Philco part #?
__________________
Tim
Reply With Quote
  #3  
Old 02-24-2019, 06:13 PM
keith6996 keith6996 is offline
VideoKarma Member
 
Join Date: Jan 2019
Posts: 5
Philco fried width control

Philco 48-2500 projection TV

The Philco part number for the width control is 32-4163-1. 20 ohms with a center tap. I'm assuming that the center tap would be measured at 10 ohms. (the Sam's Photofact does not address that) Two coils on the tubular form (connected in series), brass screw adjustment for the ferrite slug.
If anybody wants to sell a entire Philco chassis (48-2500) with the width control intact, I will gladly pay for the chassis and shipping. After changing out all the caps and a handful of resisters, a spare chassis doesn't seem like a bad idea. A good TP400a projection tube would be great too.

Thank you

Keith
keithwichmann@att.net
Reply With Quote
  #4  
Old 02-24-2019, 09:41 PM
Tim's Avatar
Tim Tim is offline
VideoKarma Member
 
Join Date: Mar 2004
Location: New Jersey
Posts: 635
Keith:

I do not have that part in my Philco parts stash. I checked and there is no Merit or Thordarson sub for it. It does look like it was used in most of the 1948 models so a chassis from the following models will have the part. 48-1000, 48-1001, 48-1050. Good luck.
__________________
Tim
Reply With Quote
  #5  
Old 02-25-2019, 10:46 AM
keith6996 keith6996 is offline
VideoKarma Member
 
Join Date: Jan 2019
Posts: 5
Philco 48-2500 width control

Hey Tim

Thanks for looking through your Philco stuff, and the info on the Philco TV'S that have this part. I wish I had more technical info on this part. The Sam's doesn't have much technical info, if it did Maybe I could match it up with a different manufacturer. I'll keep looking.

Thanks again

Keith
Reply With Quote
Audiokarma
  #6  
Old 02-25-2019, 02:55 PM
Tim's Avatar
Tim Tim is offline
VideoKarma Member
 
Join Date: Mar 2004
Location: New Jersey
Posts: 635
Keith:

The Philco factory service manual for the 48-2500 is on the ETF site:
http://www.earlytelevision.org/pdf/p...ce_48-2500.pdf
__________________
Tim
Reply With Quote
  #7  
Old 02-25-2019, 03:26 PM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,506
Try Mark Oppat.

http://www.oldradioparts.net/
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:29 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.