|
|
|
#1
01-13-2009, 01:15 PM
|
|||
|
|||
|
RCA CTC-16F Any restoration hints?
Hi All:
I've just acquired an RCA GF-631 RW with a CTC-16F chassis, remote control receiver and 7-button hand unit. Anyone here restored this from the ground up? Any gotchas or oh-my-gods? Any cautions you might know of would be greatly appreciated. 
|
|
#2
01-13-2009, 08:13 PM
|
||||
|
||||
|
No gotchas, but a lesson learned - a bad focus rectifier tube in my GF621W CTC-16 set was loading the HV - I cranked it up to get the correct HV, and had poor focus. I replaced the focus rectifier tube, forgot to recheck the HV, and ate the focus coil somehow. Next time, I'll recheck the HV setting after doing any work in that area. Found a NOS one on eBay a month later.
If you've not already tried to turn it on, bring it up on a variac. Your B+ caps will thank you! I've got the RCA Field Service Guide and Sams for your set, so if you need any info, send me a PM. Cheers,
__________________
Brian USN RET (Avionics / Cal) CET- Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit!
|
 |
|
|
Linear Mode
