Hey guys, I recently picked up a CTC-16 and had it delivered to my storage unit for the time being. I wanted to bring the chassis home and work on it so I bought a telematic TV repair jig off ebay. I wanted to know a little about it, with shipping it cost me about $160 hopefully I didn't over pay. I don't have any instructions and it came with a few adapters, what looks like a yoke, and a couple catalogs. From what I can see I only have adapters for philco and zenith. Is there a way to make these adapters is there anything special in them? I'd like to see if I could make one myself. Also the yoke adapter cable that comes out of the front, has two wires torn off one is a red wire that looks to go to the frame of the picture tube, the other wire is light blue and goes back to a jumper that plugs into the Yoke on the test jig. They're ripped off the plug does anyone know where they would solder to? It's tricky to post pictures so I'm going to put them on my Google Drive and share links.
Here is a folder on my Google Drive with pics
https://drive.google.com/drive/folde...geQRClzsvbEm0r
04-13-2024, 03:05 PM
Threaded Mode