#1
|
|||
|
|||
Stewart Warner 9100-B
I finally finished this mirror lid set recap last night. I had to drop the B+ voltage 15 volts, the set used selenium rectifiers. My AC mains runs at about 124 volts in the winter months. I also substituted a 330 ohm resistor for a 2.2k ohm resistor in series with the discharge cap in the blocking oscillator plate circuit. This was done to improve vertical linearity. The set is in Riders 3-1 and uses a 10FP4 crt.
Ed Last edited by EdKozk2; 12-13-2017 at 12:24 AM. |
#2
|
||||
|
||||
Are you sure about the CRT? I have this set and it has a 10FP4.
|
#3
|
|||
|
|||
Eric,
Thanks for catching that, my mistake. Ed |
#4
|
||||
|
||||
That's really neat.
|
#5
|
||||
|
||||
I've seen many Sparton versions, but rarely a Stewart Warner. Cool to see it working!
|
Audiokarma |
Thread Tools | |
Display Modes | |
|
|