|
|
|
#12
09-10-2019, 01:59 AM
|
||||
|
||||
|
Ok so heres my setup. I used an old BK 465 to run the juice to the filaments. I unplugged the AC filament feed from the socket on the mainboard, then connected it to the BK via one of the sockets, and monitored by DMM. Honestly there is little difference besides some of the color saturation gets a little better and whites stand out more and gets brighter but nothing huge. Focus still sucks wither it's set at standard 6.3v or up to 8v.
__________________
Honey, turn on the tv.. I'm cold! 
|
|
|
Threaded Mode