Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Radio

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-03-2015, 02:40 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Using Schottky diodes in AM detectors

Schottky and similar diodes have a much lower diode drop, even lower than germanium diodes. Some can be as low as 0.15V. Which would make for a decent detector for weaker signals. Schottky diodes have internal capacitance, but it's about the same or less than silicon detector diodes. . A quick way to tell if a Schottky diode would work in your radio is to connect it in parallel with the existing silicon diode (0.7V drop). However, the AVC circuit may get out of balance with the lower diode drop diode. Using the old silicon diode just for the AVC circuit makes it work as it did before. This also makes for a better audio detector circuit, as the back bias from the AVC cap will not be seen by the audio detector circuit. So we have two diodes, a silicon diode for the AVC, and a Schottky diode for the audio signal. This should make for better detected sound from weaker stations.
__________________
Reply With Quote
  #2  
Old 11-04-2015, 02:45 AM
catman's Avatar
catman catman is offline
catman
 
Join Date: Jun 2008
Location: Queensland, Australia.
Posts: 74
G'day mate, sadly there is more to it than appears at first sight. There are 'schottky's and schottky's'. I use the BAT 46 schottky 'germanium diode equivalent' diodes as general purpose AM detectors with excellent results however other schottky's like the IN5711 are perfectly worthless as AM detectors unless voltage bias is used!

Voltage drop isn't the full story unfortunately. Schottky's do have advantages like a complete lack of carrier storage effects and minimal leakage. For what it's worth they are also very low noise. Regards, Felix (vk4fuq) aka catman.
Reply With Quote
  #3  
Old 11-04-2015, 01:51 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by catman View Post
... BAT 46 schottky 'germanium diode equivalent' diodes as general purpose AM detectors with excellent results however other schottky's like the IN5711 are perfectly worthless as AM detectors unless voltage bias is used!
As I'm using "junk box" devices, many are surface mount without any readable or meaningful markings, I've been doing the test (holding it in parallel with the old diode) to see if that new diode will improve reception or not. As I can't tell which variety of schottky diode it is.
__________________
Reply With Quote
  #4  
Old 11-16-2015, 04:55 AM
EricColen EricColen is offline
VideoKarma Member
 
Join Date: Nov 2015
Posts: 1
I want to know something from your discussion. Why Schottky diode is preferred for the AM detector?
Also what are specifications for the circuit of the Am detector with the schottky diode?
What are other applications of this diode and for what rating of circuits it is suitable?

https://www.7pcb.com

Last edited by EricColen; 08-12-2021 at 05:18 PM.
Reply With Quote
  #5  
Old 11-27-2015, 12:56 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by EricColen View Post
I want to know something from your discussion. Why Schottky diode is preferred for the AM detector?
Mainly for the low diode drop. Regular silicon diodes have around 0.6V, the diodes I used have lower drops like 0.2V, which should make for better detection of weak signals.

Felix Catman is better versed in this area, I'm more of a hardware hacker, trying various candidate diodes until I get one that works well. (touch it across the spot where the diode would be soldered, but not solder it yet). Better knowledge would save time.
__________________
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.