Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 02-19-2017, 02:22 PM
SwizzyMan's Avatar
SwizzyMan SwizzyMan is offline
Restoring an admiral c322
 
Join Date: Apr 2015
Location: Side Lake Mn
Posts: 886
It actually turns out the smoking resistor is a 5k 10w coming off the color take off coil and feeding another 285v supply. I dont see any brown spots where burning has occurred on the resistor itself and I know a 10 watt dissipates a lot of heat. So it may just be dust on top of it burning off. But i recall never seeing any smoke until now coming from it. I checked tubes associated with it and none were shorted. I noticed that the resistor has a connection to G1 of the AGC amp tube. I had been adjusting the AGC in hope it may have given me a better picture, not sure if its set too high, but I dont think adjusting the AGC would cause this.
__________________

Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.