#11
|
||||
|
||||
Its not just a lack of green. Its also a lack of magenta/violet.
This simply means that the I/Q or rather R-Y/Q balance is off seriously. Look at the SPECIFIED type color bars with your scope and adjust per instructions. Alternatively, use R-G-B-Yellow-Cyan-Magenta bars and adjust so bars containing a given primary all have the same height at the CRT grids ... see CT-100 scope traces. Pay particular attention to the R-Y gain, its non-intuitive. If this fails, you have matrix resistor issues. |
Thread Tools | |
Display Modes | |
|
|