|
#1
|
||||
|
||||
I'm curios if those chassies where relaible as they say.
|
#2
|
||||
|
||||
Longest lasting best describes it. Hand wired sets have a massive steel
chassis thats like a heat sink. They almost never dry up like PCB chassis do. You almost never get bad connections, bad tube sockets etc. As for reliability they were probably a little better due to running cooler. Some PCB sets were so bad when old if you pull out the hoz output tube the socket starts to come out too ! And you cant resolder them right so you need to use a new socket & wires. 73 Zeno LFOD ! |
#3
|
||||
|
||||
I've bought several color Zeniths in the last few years from that era that with all original caps (but some tubes changed) that still produced a watchable picture...Heck even Zenith's first color roundy from 1962 that I got a few years ago was somewhat watchable as found.
Zenith also engineered a lot of tolerance for failure into their tube TVs...They can have several parts bad and still work acceptably (albeit below their as new performance).
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
|