#1
|
|||
|
|||
Trouble with (CR70 Beam Builder)Sencor
All the tests seem to work ok EXCEPT for the emission testing. Even with a known good crt I get no reading at all on my meter. can some one walk me through the troubleshooting procedure for this problem?thanks
|
#2
|
||||
|
||||
The selector switch could be dirty or broken. You will have to take a look inside.
__________________
"It's a mad mad mad mad world" !! http://www.youtube.com/user/mwstaton64?feature=mhee |
#3
|
||||
|
||||
Perhaps this calibration proccedure would help you track down the problem. http://antiqueradios.com/forums/view...18240#p1218240
|
#4
|
|||
|
|||
Emission checks
OK: I will run these checks. I did follow the emission checks stated in my manual using k and g leads in series with a 100k resistor but got no reading . I also checked all power resistors and wiring harness leads and they were ok.
|
|
|