Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-06-2018, 06:56 PM
Sealtest Sealtest is offline
VideoKarma Member
 
Join Date: Dec 2017
Location: Knoxville, Tennessee
Posts: 129
What is this little RCA tube tv?

Hey guys, what is this little set? The labels are either damaged or missing.

This little set took me by surprise. For the longest time I set it way back on my project list since it appeared to be a cheap RCA solid state set. Unfortunately a lot of my projects I'm stuck on so I pulled this thing out just for a break from the same sets. I noticed the back lacked the normal "no user serviceable parts inside" so I took it apart and found a very rough but cool tube chassis. Sadly it has those annoying RCA connections that are always broken so I'm not sure what to do about that.

So what is this thing? Any ideas about when it was made or if it is worth repairing? It is overall a very rough set.
Attached Images
File Type: jpg IMG-5747.jpg (74.7 KB, 126 views)
Reply With Quote
  #2  
Old 08-06-2018, 06:59 PM
WISCOJIM WISCOJIM is offline
VideoKarma Member
 
Join Date: Sep 2005
Location: Grand Chute, Wisconsin
Posts: 2,452
How about some pictures of the TV itself?

.
Reply With Quote
  #3  
Old 08-06-2018, 07:03 PM
Sealtest Sealtest is offline
VideoKarma Member
 
Join Date: Dec 2017
Location: Knoxville, Tennessee
Posts: 129
IMG_5749.jpg
Reply With Quote
  #4  
Old 08-06-2018, 09:00 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Sealtest View Post
That's the set that many seemed to think that it was a "Salesman's Sample"!
Many had a fancy wooden cabinet, that resembled a miniature console. They were a good working set if the CRT had low hours.
Reply With Quote
  #5  
Old 08-06-2018, 09:10 PM
Sealtest Sealtest is offline
VideoKarma Member
 
Join Date: Dec 2017
Location: Knoxville, Tennessee
Posts: 129
So since it is not in a wooden cabinet it's just a normal portable TV that uses the same chassis as the salesman sample? I looked up the sample sets and dang they're super cool. Too bad this one doesn't have the wood.

If I do restore this is there a place to find the broken board connectors? I have pulled apart a ton of old RCA sets and those white connectors are always broken.
Reply With Quote
Audiokarma
  #6  
Old 08-06-2018, 09:27 PM
dishdude's Avatar
dishdude dishdude is offline
VideoKarma Member
 
Join Date: Feb 2014
Posts: 821
Weird, looks like it should be SS - has to be one of the last tube B&Ws.

No such thing as a salesman sample, those were actual sets that were sold that just looked like little consoles.
Reply With Quote
  #7  
Old 08-07-2018, 01:59 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,672
The wood sets were part of the regular line. IIRC
there were 2 models of them.
Etch on these is a bit sketchy so go easy on it if you
do any soldering. The sets get as good a pix as any
"better" set.
BTW what part always breaks ?? I cant picure it.

73 Zeno
LFOD !
Reply With Quote
  #8  
Old 08-07-2018, 07:32 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by dishdude View Post
Weird, looks like it should be SS - has to be one of the last tube B&Ws.

No such thing as a salesman sample, those were actual sets that were sold that just looked like little consoles.
That model had tubes in the sweep circuits and the audio output circuit.
I had stated the fact about the "salesmans sample" in my prior entry!
Reply With Quote
  #9  
Old 08-07-2018, 07:36 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by zeno View Post
The wood sets were part of the regular line. IIRC
there were 2 models of them.
Etch on these is a bit sketchy so go easy on it if you
do any soldering. The sets get as good a pix as any
"better" set.
BTW what part always breaks ?? I cant picure it.

73 Zeno
LFOD !
It might be the card-edge connector for the small P/C module. That is the part that always breaks.
Reply With Quote
  #10  
Old 08-07-2018, 11:00 PM
Sealtest Sealtest is offline
VideoKarma Member
 
Join Date: Dec 2017
Location: Knoxville, Tennessee
Posts: 129
Quote:
Originally Posted by dieseljeep View Post
It might be the card-edge connector for the small P/C module. That is the part that always breaks.
Yep that's it. I hang out at a local scrap yard and every single older RCA that comes in has those connectors and they are always broken. Always.
Reply With Quote
Audiokarma
  #11  
Old 08-08-2018, 09:19 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,672
There was a 15" that would burn up the vert board with
those connectors. Other than that I remember a few other
cracked ones but they still made good contact. If you have a
trouble maker maybe pull it & epoxy it. You could also build up the
solder on the connections but that may spread it out more.
Best cure is good NOS if you can find some.

73 Zeno
LFOD !
Reply With Quote
  #12  
Old 08-08-2018, 09:19 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Sealtest View Post
Yep that's it. I hang out at a local scrap yard and every single older RCA that comes in has those connectors and they are always broken. Always.
Possibly 30 years since I worked on the last one. I wonder if you could take a scrap XL100 chassis that had the same setup for the modules and use the connectors.
I only had to replace one of those connectors that cracked away in a CTC48 or similar.
Reply With Quote
  #13  
Old 08-08-2018, 09:56 AM
init4fun's Avatar
init4fun init4fun is offline
VideoKarma Member
 
Join Date: Mar 2011
Posts: 1,169
Quote:
Originally Posted by dieseljeep View Post
That's the set that many seemed to think that it was a "Salesman's Sample"!
Yep , for some reason the myth of those little console looking TVs being a "Salesman Sample" was really pervasive for a while and every so often someone still does advertise one as such on Ebay . I knew right from the beginning of that "Urban Myth" that it was false , Back when console sets were popular there were exactly 0 people going door to door selling TVs ! Now people selling "Rainbow" Vacuum cleaners and Encyclopedias , oh yea once a week at least they'd be ringing the doorbell , but from my earliest recollections TVs were sold in specialty TV stores and then later in places like Sears , and never door to door .....

Last edited by init4fun; 08-08-2018 at 10:09 AM.
Reply With Quote
  #14  
Old 08-08-2018, 02:14 PM
Steve D.'s Avatar
Steve D. Steve D. is offline
VideoKarma Member
 
Join Date: Sep 2002
Location: Hollywood Hills, Ca.
Posts: 1,790
Here's the miniature 9" RCA console TV. Kinda neat.

-Steve D.
__________________
Please visit my CT-100, CTC-5, vintage color tv site:
http://www.wtv-zone.com/Stevetek/
Reply With Quote
  #15  
Old 08-08-2018, 03:45 PM
Tom9589 Tom9589 is offline
VideoKarma Member
 
Join Date: Jan 2013
Location: Stone Mountain, GA
Posts: 472
I'll bet RCA had to grit their teeth to produce a TV with Compactrons.

The wooden cabinet looks like they just took the front panel of the plastic model and mounted it into the wooden cabinet.

Very cool looking little set.
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:38 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.