Quote:
Originally Posted by jr_tech
Very much a long shot, but have you tried another CRT that is known to be good? 
jr |
yes I tried another crt same thing. But I did a resistance check on the horiz v13 and all pins are perfect except for pin 2 unless SAMs is wrong but it shows that what should be there is 20k-520 ohm but I'm getting 2.223k so this is not right . There is the horiz afc and block oscillator trans that pin 2 leads to one of those trans and I checked the resistors on both transformers one in the can and the one at the other trans and both are good .
03-22-2017, 02:05 PM
Hybrid Mode
