#1
|
|||
|
|||
Leader LCG-400 NTSC Pattern Generator
Hi;
does anyone have manuals for this? I just bought a broken one. Thanks Mick M |
#2
|
||||
|
||||
I do. It's a pretty length manual, but I suppose I could scan some pages for you. You can read about my LGC-400 repair here: http://www.videokarma.org/showthread.php?t=248294
Once I replaced all the tantalum caps, it worked just fine |
#3
|
|||
|
|||
Hi Bob;
Yes - I have watched all of your videos. That is why I bought the generator. (and the B&k 415, and 1077) I ordered the service manual from these guys: http://www.surplussales.com/Manuals/man_leader.html I did not get the user/instruction manual. I am just going to use it to work on TV sets, not try and run a studio. So I thought I would not need it. We shall see ... There are not very many TV's or Radios out here to be found. So I am restoring cool test equipment while I look. I have not received the LCG-400 yet It was listed as " was working 2-3 years ago but now just powers up. No signal output." Were all the Tantalum caps the same value? (4.7uF/25v) Mick M Last edited by MickM; 12-24-2012 at 03:41 AM. Reason: add on |
#4
|
|||
|
|||
P.S.
I would not ask someone to photocopy a manual, I was hoping for a pdf. BTW - I really enjoy your youtube channel |
|
|