#16
|
||||
|
||||
BTW for all.........
MOST horizontal outputs ( HOT's) from the late 70's on have a built in damper diode & base resistor. The resistor goes from B-E & screws up that reading. The damper diode will give a diode reading E-C one way & wide open the other on the meters diode setting. BTW #2 I lied ! I had ONE HOT open out of hundreds I found shorted. In a Zenith custom series 25". BTW #3 Quick check of HOT is ground meter & measure C to ground. If shorted unsolder the HOT's C & retest. if no short its somethin else like FBT. If the HOT is shorted the fun begins finding out why it did without blowing parts. 73 Zeno LFOD ! |
Thread Tools | |
Display Modes | |
|
|