Go Back TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

We appreciate your help

in keeping this site going.
Thread Tools Display Modes
Old 06-10-2018, 12:10 AM
MacbthPSW's Avatar
MacbthPSW MacbthPSW is offline
VideoKarma Member
Join Date: May 2018
Posts: 1
Help identifying B&W TV from photo

Hi, I'm hoping someone can help me identify the black & white TV I used with my Commodore 64 in early 1984 before I replaced it with a colour 1702 monitor.

The TV was purchased in Thunder Bay, Ontario, Canada, in the late '70s or early '80s. It was probably a 12" or 13" model. It may have been an Electrohome but I'm not sure.

I'm sorry the picture isn't very good quality, but it's the best I have of it.


The right-most knobs are the UHF and VHF dials. There are 3 small knobs to the left of those. Pretty sure the bottom one was a combo power and volume, and the other two contrast and brightness.

The layout is similar to a Panasonic TV I have, but in the few catalogues from the era I've found, the Panasonic TVs housings seemed to be more colourful and rounded than the TV I've pictured, which was more angular and had rather muted housing, probably a charcoal colour, if not dark brown or simply black.

Thanks for any help - ultimately I'd like to purchase one again.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:45 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
ęCopyright 2012, All rights reserved.