|
#1
|
|||
|
|||
Quote:
|
#2
|
||||
|
||||
When you removed one of the cables did you have a source connected to the set ? You should get half an image, not just a light screen. Unfortunately, getting half an image during this test usually means the screen is bad.
|
#3
|
|||
|
|||
I'll double check. So on one cable, or the other, I should see half? I did try the menu, buttons on remote, etc. And saw nothing.
|
#4
|
|||
|
|||
On mine (granted mine was a 2012 vintage set) it only had one T-con board and that was all I had to replace in mine to get it running.
|
#5
|
|||
|
|||
I cannot get a single pic, half screen or otherwise on this. No sound either. Not sure what to do at this point
|
Audiokarma |
#6
|
|||
|
|||
You should have sound.
Try connecting an oscillator to the A/V inputs.
Here's a link to some helpful troubleshooting tips: https://fliphtml5.com/osspz/lhwm/basic That link used to be available as a downloadable pdf file but I guess it got removed.
__________________
|
#7
|
|||
|
|||
I don't have an oscillator. Is it possible screen is bad or should I order the replacement board and take a chance?
|
|
|